ALFA OKIPAGE 20 - Manual (Page 75)

English–67
SIMM Configurations
The OKIPAGE 20 has three slots for installation of optional SIMMs:
You can use these slots to add up to 64 MB of memory (two 32 MB
SIMMs) to the standard 4 MB OKIPAGE 20/20DX printer memory, and/or
to install either the Adobe PostScript SIMM Kit or the Flash ROM SIMM.
See Chapter 7 for ordering information on these accessories.
Installing SIMMs
To install SIMMs in the printer:
1. Turn the printer off.
2. Unplug the power cord.
3. Detach the interface cable from the back of the printer.
Appendix C: Installing SIMMs
ROM Slot for
Adobe PostScript SIMM
or Flash Memory SIMM
Two RAM Slots for
Memory Expansion SIMMs
(4, 8, 16, or 32 MB each,
72-pin, 60 ns, FPM, non-parity)