ALFA OKIPAGE 20 - Manual (Page 38)

E–30 Chapter 4: The Front Feeder
Manual Feed: Envelopes
Important!
• Use rear paper exit to avoid curling
• Do not use v-flap type envelopes (see page 27)
Setting up to Print an Envelope
1. In your software program:
a. Enter the printer setup menu.
b. Select Manual Feed.
c. Select the envelope size.
d. Select landscape orientation.
2. Lower the rear paper exit tray and pull out the rear exit extender.
3. Lower the Front Feeder.
4. Flip out the manual feed tray, then pivot out the extender.
5. Adjust the paper width guides.
6. Insert the envelope with return address on lower left side and flap under-
neath.
7. Send the print command from your software.
8. When prompted to, press the FORM FEED button on the printer control
panel.
The printed envelope will exit at the rear.
Return Address