ALFA OKIPAGE 20 - Manual (Page 53)

Chapter 8: Maintenance E–45
8. Push the grey lock lever toward the back of the printer until it stops.
9. Lift out the image drum and put it on a smooth, flat surface. Be sure to
protect the drum from exposure to light either by placing it in the light
shield bag supplied with the printer, or by placing a sheet of paper over
it.
10. Use the lens cleaner supplied in the new toner kit to clean the LED
array.
11. Locate the clear plastic film inside the front of the printer, then fold the
lens cleaner over and use it to wipe any paper dust off the plastic film.
12. Replace the image drum and close the cover.
Film