HID DTC1000/4000 User Guide - Manual (Page 42)

© 2012 HID Global Corporation All rights reserved
DTC1000/DTC1000M/DTC4000 Card Printer/Encoder User Guide (L001398, Revision 1.5)
42
Using the Calibrate Ribbon tab
The two buttons for the Calibrate Ribbon tab are described below.

Calibrate button: Sends the Calibrate Ribbon Command to Printer. Follow the instructions below to
set up the Printer.

Help button: Launches help specific to this tab.
Step Procedure
1 Select the Calibrate Ribbon tab.
a. Ensure that the Ribbon is removed from the Ribbon Drawer.
b. Ensure that the Ribbon Cartridge is removed.
c. Ensure the Printer‟s Cover is closed.
d. Click on the Calibrate button. (Note: The Printer will display
CALIBRATE PASSED DTC4000)
e. Click on the OK button (on the driver window) to complete the
procedure.