Avaya CPSEE_TSP500 - Manual (Page 102)

Chapter 5 Admin Terminal Commands
Page 5-32 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
show stat
Displays a variety of information on Stations. This command can be entered
with the rotate through switch (-r).
In the show stations display, the Dtrk field displays the digital station trunks
associated with the station.
The MTX column displays the “matrix number” of the station.
Example:
ST# Type Dtrk [Mtx] HOOK Camp ListenTo[Mtx] Queue trk
teln
1 inb 289 [0240]* OFF 2 Parked[7fff] waitque 0 .
2 inb 290 [0242]* OFF 2 Parked[7fff] connque 0 .
3 inb 291 [0244]* OFF 2 Parked[7fff] waitque 0 .
4 inb 292 [0246]* OFF 2 Parked[7fff] connque 0 .
5 inb 293 [0248]* OFF 2 Parked[7fff] connque 0 .
6 inb 294 [024a]* OFF 2 Parked[7fff] waitque 0 .
7 inb 295 [024c]* OFF 2 Parked[7fff] connque 0 .
8 inb 296 [024e]* OFF 2 Parked[7fff] waitque 0 .
9 inb 297 [0250]* OFF 2 Parked[7fff] connque 0 .
10 inb 298 [0252]* OFF 2 Parked[7fff] connque 0 .
11 inb 299 [0254]* OFF 2 Parked[7fff] connque 0 .
12 inb 300 [0256]* OFF 2 Parked[7fff] connque 0 .
13 inb 301 [0258]* OFF 2 Parked[7fff] connque 0 .
14 inb 302 [025a]* OFF 2 Parked[7fff] connque 0 .
15 inb 303 [025c]* OFF 2 Parked[7fff] connque 0 .
16 inb 304 [025e]* OFF 2 Parked[7fff] connque 0 .
17 inb 305 [0260]* OFF 2 Parked[7fff] connque 0 .
Zflags Internal flags.
Tflags Internal flags
Trunk TrkB<Board>S<stream>C<channel>
Mtx Internal matrix number
ListenTo[Mtx] Trunk, Station, DSP device the trunk is listening to and its matrix num-
ber. Trunk, Station and DSP are respectively displayed as T<xxxx>,
S<xxxx> or D<xxxx> where <xxxx> is the actual Trunk, Station, or
DSP number.
DSP Address of DSP attached to this device
Table 5-19: show ports.
Command Description