Avaya CPSEE_TSP500 - Manual (Page 91)

Chapter 5 Admin Terminal Commands
CPSEE_TSP500 User Guide Version 4.0 Page 5-21
This document is confidential and proprietary to SER Solutions and is not for external use.
Holds Message Port Blocks currently in use. When an Encore Voice message
is played to one or more station or trunks, it is played out of the DSP associ-
ated with the data structure on this queue. When the message play completes,
the Message Port Block is placed back on the MpAvail queue.
SpyAvail
Holds data structures associated with Conference Blocks. It is from this
queue that Conference Blocks will be grabbed for use in Conferencing or
Monitoring.
SpyBad
Holds data structures associated with Conference Blocks that have failed. An
automated daily test verifies that audio paths are functioning properly. If a
conference block fails, it is placed on this queue.
SpyInuse
Holds data structures associated with Conference Blocks that are currently
used for Monitoring
StInact
Inactive Stations, (those that are not logged into a Campaign) are stored here.
StWait
Holds dial requests for Adjunct Controlled Manual Dials for Stations when
there is not a trunk available. When an appropriate trunk becomes available,
the request will be removed from the queue and dialed. Peak counts on his
queue may (but not necessarily) indicate a trunk bound system.
Talkque
Trunks that are connected are stored here. A trunk is considered connected if
an Unclassified Call has completed dialing, or a Classified Call has detected
voice.
Tdisabled
Holds Trunks that have been disabled. Trunks may be disabled or enabled by
the disable and enable Dumb Terminal command, respectively.
Thang
Holds Trunks that have been hung-up, and are resting before being made
available. The amount of time they rest is configurable in the Dialing Rules
(typically four seconds).
Tied
The queue holds data structures for trunks that are connected together by the
Third Party Transfer feature.