Avaya CPSEE_TSP500 - Manual (Page 129)

Chapter 6 Trunk Spans and Dialing Rules
CPSEE_TSP500 User Guide Version 4.0 Page 6-15
This document is confidential and proprietary to SER Solutions and is not for external use.
Example:
RNA_EXTEND_TIME
This keyword specifies the number of seconds to extend call analysis if the
Ring No Answer timeout has occurred but the call has been answered.
RULE_0 through RULE_4
There are five trunk groups within the CPSEE_TSP500. Trunk Group 0 is
the default for all trunks not assigned elsewhere. Each trunk group has a dial-
ing rule associated with it.
This keyword specified the method of dialing on the indicated trunk group for
the various dial types supported (six of them). A vertical bar separates each
dial specification.
The following is an explanation of the various dial types associated with each
trunk group.
1. Local telephone number.
2. Local, but NOT in our area code.
3. Intra-Latta – Not local, but in our area code.
4. Long Distance.
5. Special. This rule is used for telephone numbers that are less than ten
digits (USA only). For example, an extension on a PBX is considered
Special. Special is also the rule that will be used for dialing Remote
Agents (Outbound Digital Stations).
6. International dialing.
Individual dialing rules can be made up of various characters. The following
is an explanation of those characters.
REVERSE_STATIONS Value
Digital Trunk
Spans
0 1
37 1-24 49-72
38 25-48 25-48
39 49-72 1-24