ATEN ATEN Matrix KVM KM0832 - Manual (Page 128)

KM0832 User Manual
118
SADM CONFIGURATION
Only the super administrator can view and control the functions under this
menu.
(continues on next page)
Setting Function
SET
NETWORK This function allows administrators to configure the network settings for
the KM0832 on the Local Area Network (LAN). A submenu appears
with the following choices: HTTP PORT, HTTPS PORT, AUTOMATIC IP
ADDRESS, and IP ADDRESS SETTING.
To set the HTTP port:
1. From the list, select HTTP PORT.
2. Key in the port (typically port 80), and press [Enter].
To set the HTTPS port:
1. From the list, select HTTPS PORT.
2. Key in the port (typically port 443), and press [Enter].
To enable dynamic IP addressing with a DHCP server:
1. From the list, select AUTOMATIC IP ADDRESS.
2. Press [Y] to enable; or, press [N] to disable.
Note: The default is enabled. If you disable this feature, then you
should manually configure the IP settings.
To manually configure the IP settings:
1. From the list, select IP ADDRESS SETTING. A list appears with the
following choices: IP ADDRESS, SUBNET MASK, GATEWAY, PRI-
MARY DNS SERVER, and ALTERNATE DNS SERVER.
2. Select each choice and enter the numerical address (dotted quad
address), and then press [Enter].
Note: These settings do not apply if you enable DHCP.
SET CLOCK This function allows administrators to configure the date and time for
the KM0832. A submenu appears with the following choices: SET
DATE and SET TIME.
To set the date and time:
1. From the list, select SET DATE. In the field that appears, enter the
date in YYYY-MM-DD format, and then press [Enter].
2. From the list, select SET TIME. In the field that appears, enter the
time in HH:MM:SS format, and then press [Enter].