ATEN ATEN Matrix KVM KM0832 User Manual
Page 13
Chapter 1. Introduction
3
Graphical user interface for convenient, user-friendly operation, supported
by the KA9233 Console Module and Administrator Utility
Daisy chain up to 7 additional KM0432 or KM0216 Matrix KVM
Switches
1
Auto-sensing of station’s position on daisy chain installations—OSD and
front panel LED indicates station’s position
Port names are automatically reconfigured when the station sequence is
changed
OSD screen automatically adjusts to resolution changes
Auto Scan feature for monitoring user-selected computers
Super Administrators can view and end sessions of other users
Super Administrators can broadcast keyboard input to all computers in the
KVM installation
PS/2 keyboard and mouse emulation—computers boot even when the
KVM console focus is elsewhere
LCD, VGA, SVGA, XGA, and MultiSync support; DDC2B
Superior video quality—1024 x 768 @ 60Hz for up to 300m; 1920 x 1440
@ 60Hz (distance depends on installation environment)
Auto Signal Compensation (ASC) assures optimum video resolution for
distances up to 300m between computers and KVM consoles—no DIP
switch setting required
Free lifetime firmware upgrades
Compact design—rack mounts in only 1U of rack space
Multi-architecture compatibility
PC (x86/x64)
Macintosh PowerPC
Sun Microsystems Sparc
Allows centralized control of computers located at non-contiguous
locations on the site.
1. If this feature is not operative on your unit, you will need a newer
version of the firmware. Contact your dealer for details.