ATEN ATEN Matrix KVM KM0832 - Manual (Page 123)

Chapter 5. OSD Operation
113
(continued from previous page)
Setting Function
USER ACCESS
SETTING Allows you to set special access rights for a user to specific
KVM ports. If you want a user’s KVM port access rights to be
determined by the group, you do not need to modify these
settings.
1. The user list appears.
2. Select the user for whom you wish to modify port access
rights. A list of all KVM ports appears.
3. Select a KVM port, and then set the User Access Type:
NONE—no port access; VIEW—users can only view video
from the KVM port; FULL—users can view video from the
KVM port and control the KVM port; GROUP—port access
rights are determined by the group of which the user is a
member. (GROUP is the default setting.) The User Access
Type you selected is assigned to the user.
Note: If NONE is set, the KVM port will not appear in the
user's KVM port list on the OSD main screen.
4. If the OSD does not automatically return to the previous
screen, press [Esc]. The OSD returns to the previous screen.
5. Repeat this procedure for all the KVM ports in the list.