ATEN ATEN Matrix KVM KM0832 - Manual (Page 18)

KM0832 User Manual
8
3. User Port LEDs
Lights (green) to indicate that the console module connected to the
corresponding user port is online. Flashes when cascaded from the KVM
port(s) of a parent KVM switch.
4. SYSTEM RESET Button
Š Pressing in this button performs a system reset. When the system is
reset, the KM0832 beeps, and then the KVM port LEDs flash in
succession until the reset is completed. After the reset is completed you
can login again.
Note: This button is semi-recessed and must be pushed with a thin
object—such as the end of a paper clip or a ballpoint pen.
5. USER PORT 1 Switch
This switch selects which USER PORT 1 is active—the one on the front
panel or the rear panel. Set it to FRONT to activate USER PORT 1 on the
front panel; set it to REAR to activate USER PORT 1 on the rear panel.
6. USER PORT 1 (Maintenance Port)
This user port is provided for convenient and easy access for system
maintenance. It shares the same function with USER PORT 1 on the rear
panel. By switching the USER PORT 1 switch to FRONT, USER PORT 1
on the rear panel is deactivated and USER PORT 1 on the front panel is
activated. Use it just as you would any other user port. (You must return
the USER PORT 1 switch to the REAR position to reactivate USER PORT
1 on the rear panel.)
Condition Indication
Steady Console module is on
Flashing User port is cascaded from a powered on KVM switch
Off Console module is off