ATEN ATEN Matrix KVM KM0832 - Manual (Page 77)

Chapter 4. Administrator Utility
67
Port Management
KM0832 port access rights for users and groups are set on a port-by-port basis,
giving administrators a high degree of control over which KVM ports users can
access and how they access the KVM ports. To enable users to access KVM
ports, you must first configure the user access rights for each KVM port. By
default, all super administrators and administrators have full access to all KVM
ports.
Hint: Adding users to groups streamlines KVM port configuration by
allowing you to assign port access to whole groups of users at one time.
In this section we will discuss how to:
Š Set port access rights for users and groups
Š Configure KVM port settings and assign names to KVM ports
Š Restore KVM port defaults
Accessing Ports
All KVM ports in the station are listed on the Port Select Webpage.
To open the Port Select Webpage:
1. If you are not logged in to the KM0832 Administrator Utility, open the
KM0832 Login page and login. The KM0832 Administrator Utility Main
Screen will appear.
2. In the tree view, click on a station to select it.
3. From the Administration menu, choose Port Management. The Port
Select Webpage for that station appears.