ATEN ATEN Matrix KVM KM0832 - Manual (Page 45)

35
Chapter 3
Basic Operation
Hot Plugging
The KM0832 supports hot plugging—components can be removed and added
back into the installation by unplugging their cables from the ports without the
need to shut down the KVM switch. In order for hot plugging to work properly,
however, the procedures described below must be followed:
Switching Daisy-Chained KVM Switch Positions
You can switch the position of daisy-chained KM0432 or KM0216 by simply
unplugging from the old master KVM switch and plugging into a new one.
Switching Cascaded KVM Switch Positions
You can switch the position of cascaded KM0832 by simply unplugging from
the old parent KVM switch and plugging into a new one. The station names and
port notes are automatically synchronized with the new position in the
installation.
Cascaded non-KM0832 also can be hot plugged; however, port notes are not
automatically synchronized. You will need to manually update port notes after
changing the position of either cascaded non-KM0832 or attached computers.
Hot Plugging User Ports
The keyboard, monitor, and mouse all can be hot plugged. If you experience a
problem after you plug in a new mouse, do a system reset by pressing the reset
button on the KM0832's front panel (see p. 8 for details). If this doesn't resolve
the problem, restart the computers that have the problem.