ATEN ATEN Matrix KVM KM0832 - Manual (Page 137)

Chapter 6. Hotkey Operation
127
and mouse clicks can be input. You must exit Auto Scan mode in order
to regain normal control of the KVM console.
3. To exit Auto Scan mode press [Esc] or [Spacebar]. Auto Scanning stops
when you exit Auto Scan mode.
Hotkey Beeper Control
The beeper (see SET BEEPER, p. 110) can be toggled on and off by means of
a hotkey. To toggle the beeper, enter the following hotkey combination:
1. Invoke Hotkey mode (see p. 123).
2. Press [B]
After you press B, the beeper toggles on or off. The command line displays
BEEPER ON or BEEPER OFF for one second; then the message disappears
and you automatically exit Hotkey mode.