ATEN ATEN Matrix KVM KM0832 - Manual (Page 159)

Appendix
149
Restoring Original Factory Default Settings
You can restore the original factory default settings for the KM0832 Matrix
KVM Switch. The original password for the default super administrator
account is restored; all super administrator, administrator, user, and group
accounts are removed from the system. Only the station name, Webpage
Session Timeout setting, network settings, and date and time are retained. This
procedure requires the use of a jumper cap.
1. Turn off the KM0832 and unplug the power cord.
2. Remove the cover of the KM0832.
3. Place a jumper cap over pins 1-2 of the J3 jumper on the mainboard.
4. Plug in the power cord and turn on the KM0832. The following directions
appear on the KVM console screen:
USERNAME AND PASSWORD INFORMATION AND PORT/USER
INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE
SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN
RESTART.
(Continues on next page.)
J8 J3