ATEN ATEN Matrix KVM KM0832 - Manual (Page 88)

KM0832 User Manual
78
Display Duration
Display duration determines the length of time that the port ID displays on the
screen after a KVM port change. The table below explains the choices:
Set Scan
Select the KVM ports that are viewed under Auto Scan mode and the duration
of time that they receive the KVM focus.
Choice Meaning
Always On Displays the port ID at all times.
User Defined Lets you select the amount of time (from 1–240 seconds). The
default is 3 seconds. A value of 0 (zero) disables this function.
Setting Function
Scan Timer Determines how long the KVM focus dwells on each KVM port as it
cycles through the selected KVM ports in Auto Scan mode (see F7
SCAN, page 121). Enter a value from 0–240 seconds. The default
is 5 seconds. Entering 0 will cause the KM0832 to automatically
enter Skip mode when Auto Scan mode is invoked.
Scan Mode Selects which computers will be accessed under Auto Scan mode
(see F7 SCAN, page 121). Choices are:
Personal—only those KVM ports that the user has set as
personal. See SET PERSONAL VIEW on page 107.
Accessible—only those KVM ports that the user is permitted to
access. See Managing Port Access on page 68.
Accessible + Powered—only those KVM ports that the user is
permitted to access and that have their attached computers
powered on.
The default is Accessible + Powered.