ATEN ATEN Matrix KVM KM0832 - Manual (Page 93)

Chapter 4. Administrator Utility
83
Upgrading Firmware via the KM0832 Administrator Utility
To upgrade the firmware for all possible devices in the KVM installation:
1. From the computer that was used to download the firmware upgrade pack-
age, open a Web browser and login to the KM0832 Administrator Utility
(see Logging In, page 40).
2. Click the Upgrade icon. The following dialog box appears:
3. Click OK to enter Firmware Upgrade mode. This may take a few minutes
while the system prepares to upgrade the firmware. Users with active
sessions in the OSD will be informed that they should logout. (Some
KVM consoles may be automatically logged out.)
After a few minutes, the Firmware Upgrade Webpage appears. It
displays the current firmware version(s) of the KM0832 and other
module(s).
4. Select the check box for each module that you wish to upgrade. Or, click to
clear the check box for each module that you do not wish to upgrade.
5. Click Browse. The Choose file dialog box appears.
6. Navigate to the directory where the new firmware upgrade package file
was saved, select the file, and click Open. The path and filename appear in