Sony TAV-L1 - Manual (Page 22)

22 GB
* Note that this button may not be available in some countries.
To access Digital Text*
Many broadcasters provide a Digital Text service.
Digital Text offers graphically rich contents,
compared to Analogue Text.
Select a digital channel which provides Digital Text,
then press /.
When a broadcaster provides a dedicated Digital Text
channel, select this channel to access Digital Text.
To navigate through Digital Text, follow the
instructions on the screen.
To exit Digital Text, press
.
To move around, press M/m/</,.
To select items, press (OK) and the number
buttons.
To access shortcuts, press the coloured buttons.
* Note that this function may not be available in some countries.
To access Analogue Text
In analogue mode, press /. Each time you press /,
the display changes cyclically as follows:
Text
t Text over the TV picture (mix mode) t No
Text (exit the Text service)
To select a page, press the number buttons or PROG
+/–.
To hold a page, press
/ .
To reveal hidden information, press / .
Tips
• Ensure that the system is receiving a good signal, or some
text errors may occur.
• Most TV channels broadcast a Text service. For
information on the use of the service, select the index
page.
• While you are viewing Teletext, press repeatedly to
choose between four different options of brightness.
• When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
Picture Freeze
Freezes the TV picture (e.g. to make a note of a
telephone number or recipe).
1
Press .
2
Press </M/m/, to adjust the position
of the window.
3
Press to remove the window.
4
Press again to return to normal TV
mode.
To change the screen mode manually to
suit the broadcast
Press repeatedly to select Wide, Smart, 4:3, 14:9,
or Zoom.
Displays wide screen (16:9) broadcasts in the correct
proportions.
Displays conventional 4:3 broadcasts with an
imitation wide screen effect. The 4:3 picture is
stretched to fill the screen.
Mute the sound Press %. Press again to restore.
Switch to digital
mode Press DIGITAL*.
Hide interactive
prompts from the
screen (in digital
mode only)
Switch to analogue
mode Press ANALOG.
Return to the
previous channel
watched (for more
than five seconds) Press .
Access the
Programme index
table (in analogue
mode only) Press (OK). To select a
channel, press M/m, then press
(OK).
To access the Input
signal index table Press (OK). Press , to
select the desired input signal,
press
m/M, then press (OK).
To Do this
Wide
Smart*
4:3