Sony TAV-L1 - Manual (Page 44)

44 GB
Set Up menu
You can select the options listed below on the Set Up
menu. To select options, see “Navigating through
menus” (page 38).
Starts the “first time operation menu” to tune in all the
available channels. Usually you do not need to do this
operation because the channels are already tuned
when the system was first installed (page 18).
However, this option allows you to repeat the process
(e.g., to retune the system after moving house, or to
search for new channels that have been launched by
broadcasters).
1
Press (OK) to select [Auto Startup].
2
Press </M/m/, to select the language,
then press (OK).
3
Press M/m to select the country/region in
which you will operate the system, then
press
(OK).
4
Press (OK) to select [Yes].
The auto-tune display appears on the screen.
5
Follow steps 1 to 4 of “7: Auto-tuning the
TV” (page 18).
Selects the language in which the menus are
displayed.
1
Press (OK) to select [Language].
2
Press M/m to select the language, then
press (OK).
All menus will appear in the selected language.
Selects the country/region where you operate the
system.
1
Press (OK) to select [Country].
2
Press M/m to select the country/region in
which you will operate the system, then
press
(OK).
If the country/region in which you want to use the
system does not appear in the list, select [-] instead
of a country/region.
Tunes in all the available analogue channels.
Usually you do not need to do this operation because
the channels are already tuned when the system was
first installed (page 18). However, this option allows
you to repeat the process (e.g., to retune the system
after moving house, or to search for new channels that
have been launched by broadcasters).
1
Press (OK) to select [Auto Tuning].
2
Press (OK) to select [Yes].
The auto-tune display appears on the screen.
3
Follow step 1 to 4 of “7: Auto-tuning the
TV” (page 18).
When all available analogue channels have been
tuned, the system returns to normal operation.
Changes the order in which the analogue channels are
stored on the system.
1
Press (OK) to select [Programme
Sorting].
2
Press M/m to select the channel you
want to move to a new position, then
press
(OK).
3
Press M/m to select the new position for
your channel, then press (OK).
Repeat the procedure in steps 2 and 3 to move other
channels if required.
Auto Startup
Language
Select: Set: Back: OK End: MENU
Auto Startup
Language
Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Manual Programme Preset
Digital Set Up
English
-
Set Up
Country
Auto Tuning (Analogue mode only)
Programme Sorting
(Analogue mode only)