Sony TAV-L1 - Manual (Page 73)

Usi
ng t
he Li
ft
Uni
t/Fr
ont
Pane
l Di
spl
ay
73 GB
(SW LEVEL)
You can reinforce bass frequencies on any source.
1
Press AMP MENU.
2
Press M/m repeatedly until “SW LEVEL”
appears in the front panel display, then
press
(ENTER) or ,.
3
Press M/m to select the desired
subwoofer level, then press (ENTER).
The setting is selected and setup is complete.
(Lift Mode)
The lift unit moves up and down by pressing on
the system or remote. The lift unit can also be moved
automatically, according to the selected input or
system power on/off when you select “AUTO” in
“Lift Mode.”
1
Press AMP MENU.
2
Press M/m repeatedly until “Lift Mode”
appears in the front panel display, then
press
(ENTER) or ,.
3
Press M/m to select the desired lift mode,
then press (ENTER).
• “AUTO”: Lift unit can be set to move
automatically according to a selected inputs or
when the system is turned on/off. Also you can
move it by pressing
.
• “MANUAL”: Lift unit is moved by pressing
.
• “LOCK”: Lift unit will not move, even if you
press .
Notes
• If you change the lift mode setting, change it while the lift
unit is not moving.
• The lift unit has a sensor in its top and bottom. If the sensor
detects an obstacle, it stops moving. If this occurs, remove
any obstacles, press "/1 or 1 on the system, and then
press
. The lift unit starts moving again.
Reinforcing bass frequencies
AMP MENU
M/m/,/ (ENTER)
With cover opened.
Using the lift function
AMP MENU
M/m/,/ (ENTER)
With cover opened.
Continued