Sony TAV-L1 - Manual (Page 76)

76 GB
Connecting to the system (side)
Note
When connecting headphones, the lift unit does not move
even if
is pressed.
To connect Do this
“PlayStation 2”,
DVD player or
decoder A Connect to the scart socket /
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the decoder,
then the unscrambled signal is output
from the decoder.
DVD recorder or
VCR that supports
SmartLink B Connect to the scart socket /
2. SmartLink is a direct link
between the system and a VCR/
DVD recorder. For more
information on SmartLink, refer to
the instruction manual supplied
with your VCR or DVD recorder.
Personal Computer
(Audio signal) C
Connect to the PC 5 on the rear
of the system (page 75).
AV amplifier D Connect to the DVD DIGITAL
OUT on the rear of the system.
Refer to the instruction manual
supplied with your AV amplifier.
Note
Super Audio CD/MP3/Video CD
audio signals are not output from the
DVD DIGITAL OUT jack.
IN
R/D/D/D
L/G/S/I
6
4
S
R/D/
D/D
L/G/
S/I
(MONO)
S VHS/Hi 8/DVC
camcorder
Headphones
E
G
F
Digital satellite
receiver
To connect Do this
Digital satellite
receiver E
Connect only to the HDMI IN 6
socket. The digital video and audio
signals are input from the digital
satellite receiver. If the digital
satellite receiver has a DVI socket
and not an HDMI socket, connect
the DVI socket to the HDMI IN 6
socket, and connect the audio
socket to the audio sockets HDMI
IN 6. The digital video and
analogue audio signals are input
from the digital satellite receiver .
Note
If you use only the HDMI
connection, and the connected
equipment does not conform to PCM
output, or equipment setting is
incorrect, audio signal may not be
output. Refer to the instruction
manual supplied with the connected
equipment for settings, etc.
S VHS/Hi 8/DVC
camcorder F
Connect to the S video socket
4 or the video socket 4,
and the audio sockets 4. To
avoid picture noise, do not connect
the camcorder to the video socket
4 and the S video socket
4 at the same time. If you
connect mono equipment, connect
to the L/G/S/I sockets
4, and
set [Dual Sound] to [A] (page 41).
Headphones G Connect to the i socket to listen
to sound on headphones.