Sony TAV-L1 - Manual (Page 48)

48 GB
Displays the [Digital Set Up] menu. You can change/
set the digital settings using this menu.
* Note that this function may not be available in some countries.
1
Press (OK) to select [Digital Set Up].
2
Press M/m to select the desired icon
below, then press (OK).
3
Press M/m to select one of the following
options, then press (OK).
Digital Set Up*
Option Description
Digital Tuning Tunes in all the available
digital channels.
Usually you do not need to do
this operation because the
channels are already tuned
when the system was first
installed (page 18). However,
this option allows you to repeat
the process (e.g., to retune the
system after moving house, or
to search for new channels that
have been launched by
broadcasters).
1 Press (OK) to start
digital auto-tuning.
When all available digital
channels have been tuned,
a message stating that the
auto-tuning process is
finished appears.
2 Press <.
Digital Auto
Tuning
Programme List Edit
Digital Manual Tuning
Digital Auto Tuning
Digital Tuning
Select: Enter: OK Exit: MENU
Digital Tuning menu
Option Description
Programme
List Edit Removes any unwanted digital
channels stored on the system,
and changes the order of the
digital channels stored on the
system.
1 Press M/m to select the
channel you want to
remove or move to a
new position.
If you know the channel
number (frequency)
Press the number buttons to
enter the three-digit
programme number of the
broadcast you want.
To display the previous or
next five channels
Press the red button
(previous) or the green
button (next).
2 Remove or change the
order of the digital
channels as follows:
To remove the digital
channel
Press
(OK). A
message that confirms
whether the selected
digital channel is to be
deleted appears. Press
,
to select [Yes], then press
(OK).
To change the order of
the digital channels
Press
,, then press M/m
to select the new position
for the channel and press
(OK). Repeat the
procedure in steps 1 and 2
to move other channels if
required.
3 Press <.