Sony TAV-L1 - Manual (Page 47)

Usi
ng t
he TV
M
e
nu
47 GB
AFT Fine-tunes the selected
programme number manually
if you feel that a slight tuning
adjustment will improve the
picture quality. (Normally, fine
tuning is performed
automatically.)
1 Press M/m to adjust the
fine tuning over a
range of
– 15 to +15,
then press (OK).
2 Press m to select
[Confirm], then press
(OK).
3 Press m to select [OK],
then press (OK).
To restore automatic fine
tuning, select [On] in step 1.
Audio Filter Improves the sound for
individual channels in the case
of distortion in mono
broadcasts. Sometimes a non-
standard broadcast signal can
cause sound distortion or
intermittent sound muting
when watching mono
programmes.
1 Press M/m to select
[Low] or [High], then
press
(OK).
If you do not experience
any sound distortion, we
recommend that you leave
this option set to the factory
setting [Off].
2 Press m to select
[Confirm], then press
(OK).
3 Press m to select [OK],
then press (OK).
Notes
• You cannot receive stereo or
dual sound when [Low] or
[High] is selected.
• Not available when [System] is
set to [L].
Option Description
Skip Skips unused analogue
channels when you press
PROG +/– to select channels.
(You can still select a skipped
channel using the number
buttons.)
1 Press M/m to select
[Yes], then press
(OK).
2 Press m to select
[Confirm], then press
(OK).
3 Press m to select [OK],
then press (OK).
To restore a skipped channel,
select [No] in step 1.
Decoder Views and records the
scrambled channel selected
when using a decoder
connected to the scart
connector /
2 either
directly or via a VCR.
Note
Depending on the country/region
selected for [Country] (page 44),
this option may not be available.
1 Press M/m to select
[On], then press
(OK).
2 Press m to select
[Confirm], then press
(OK).
3 Press m to select [OK],
then press (OK).
To cancel this function
afterwards, select [Off] in step
1.
ATT Attenuates the RF signal. In
case of a strong RF signal,
some video interference may
be displayed.
1 Press M/m to select
[On], then press
(OK).
2 Press m to select
[Confirm], then press
(OK).
3 Press m to select [OK],
then press (OK).
Option Description
Continued