Sony PCM-R300 - Manual (Page 14)

14 EN
Playback Operations
To stop playing a track repeatedly
Press REPEAT repeatedly until the REPEAT 1 indicator
goes off.
Note
Repeat Play of a single track is canceled when you take out
the cassette.
Playing Tracks Skipping
Specific Portions During
Playback (Skip Play)
Please note that skip IDs (see page 15) must be written
on the tape before you can use Skip Play.
= / + (SELECT)
0 / ) (DATA) ENTER
MENU
MARGIN
OPEN/CLOSE
RESET
RESET MODE
ENTER MENU
REW FF
SELECT DATA
AMS INPUT
ID
PHONES SBM ID MODE REC MODE
REC REC MUTING PAUSE PLAY STOP
PHONE LEVEL
REC LEVEL
RENUMBER REHEARSAL AUTO
WRITE ERASE
g
6
5 4 6
0
3 7
2 8
1 9
10
MAX MIN
ON 48 kHz 44.1kHz LONG
START STOP END
STANDARD
OFF
ANALOG OPT
POWER
COAXIAL
=
p P R r ”
+ 0 ) CH-1 (L) CH-2 (R)
1
While the deck is stopped or paused, press
MENU repeatedly until “--MENU--” appears in
the display.
2
Press =/+ (SELECT) repeatedly to select
“SKIPPLAY.”
3 Press 0/) (DATA) to select “on.”
“on” indication flashes in the display.
4
Press ENTER.
The SKIP PLAY indicator lights up in the display.
When the deck detects a skip ID, it fast-forwards
the tape to next start ID, then resumes playing.
To cancel Skip Play
Do steps 1 to 4 above to set “SKIPPLAY” to “--.”
The SKIP PLAY indicator goes off.
Playing Tracks Repeatedly
(Repeat Play)
Z
You can play a specific track or all the tracks on the
tape repeatedly.
OPEN/
CLOSE
COUNTER
REPEAT
1 3 2
RESET MODE
6
CLEAR
4 6 5
7 9 8
0
REPEAT
Playing all tracks repeatedly
Press REPEAT repeatedly while playing a track until
the REPEAT indicator lights up in the display.
The deck will play all tracks 5 times, then stops.
If the deck detects either of the following during
Repeat Play, it will rewind the tape to its beginning
and start playing again.
— A blank section of 9 seconds or more
— The end of the tape or the end ID
To stop playing all tracks repeatedly
Press REPEAT repeatedly until the REPEAT indicator
goes off.
Note
Repeat Play of all tracks is canceled when you take out the
cassette.
Playing a track repeatedly
Press REPEAT repeatedly while playing the track you
want to repeat until the REPEAT 1 indicator lights up
in the display.
The deck plays the current track 5 times and then
stops.
If the deck detects any of the following during Repeat
Play, it will rewind the tape to the start ID of the
current track and starts playing again from that
position.
— The next start ID
— A blank section of 9 seconds or more
— The end of the tape or end ID
— A skip ID with Skip Play activated