Fcportlist, Fcportname, Fcscsibusystatus – ATTO Technology Diamond Storage Array VT-Class User Manual

Page 47: Fcwwname, Fcportlist fcportname fcscsibusystatus fcwwname

Advertising
background image

36

CLI: Fibre Channel

FcPortList
Lists the status of all available Fibre Channel ports.

Immediate command: FcPortList

FcPortName
Returns the Fibre Channel port name stored in NVRAM
for this Fibre Channel port.

Get syntax: get FcPortName [port number]

FcScsiBusyStatus
Specifies the SCSI status value returned when the
Diamond is unable to accept a SCSI command because of
a temporary lack of resources.

Default: busy
Actions: set FcScsiBusyStatus [busy | qfull]
Requires a SaveConfiguration Restart command
Get syntax: get FcScsiBusyStatus

FcWWName
Sets or view the Word Wide Name (WWPN) of the
referenced Fibre Channel port. The WWPN is a unique 8-
byte number that identifies the port on a Fibre Channel
network. Only the three least significant bytes of the
WWPN can be modified. Fabric and loop operations are
unpredictable if duplicate WWNs are assigned.

Default: 20 00 0x where x is for 0 for port 0, 1 for port 1
Set syntax: set FcWWName [PortNumber [0 | 1]
Requires a SaveConfiguration Restart command
Get syntax: get FcWWName [PortNumber [0 | 1]

Advertising