ATTO Technology Diamond Storage Array VT-Class - Manual (Page 92)

A-xi
ATTO Technology Inc. Diamond Storage Array Installation and Operation Manual
Combined Symmetric/Asymmetric Model
Many hosts. All zone commands except ZoneCommit
affect only the planned configuration. ZoneCommit sets the Planned Configuration into the Active
Configuration.
ZoneClearAll Clears any previously defined zones
ZoneCreate zone_1 Creates a zone named zone_1
ZoneAddHost zone_1 20:00:00:10:86:00:01:34 Adds host 1 WWPN to zone_1
ZoneAddHost zone_1 20:00:00:10:10:10:86:01 Adds host 2 WWPN to zone_1
ZoneAddDevice zone_1 1 2 Adds LUN 1 and LUN 2 to zone_1
ZoneAddPort zone_1 0 LUN 1 and LUN 2 will be available through HIC 0 for only the
hosts in zone_1
ZoneCreate zone_2 Creates a zone named zone_2
ZoneAddHost remaining Allows all other hosts (not host 1 or host 2) access to zone_2
ZoneAddDevice zone_2 3 4 5 6 Adds LUNs 3, 4, 5 and 6 to zone_2
ZoneAddPort zone_2 1 LUNs 3, 4, 5 and 6 will be available through HIC 1 for all hosts in
zone 2 (excludes host 1 and host 2)
ZoneState zone_1 enabled Enables Zone_1
ZoneState zone_2 enabled Enables Zone_2
ZoneCommit Sets the Planned Zoning Configuration into the Active
configuration. No other LUNs will be available to any host.