Cooling the oven down before cleaning 10 – Merrychef eikon e3 User Manual

Page 21

Advertising
background image

Service & Parts Manual original Instructions

Part Number 32Z3812 US

Issue 1

21

PR

ODUC

T

DE

TAILS

1

5

2

3

4

WARNING: DO NOT USE CAUSTIC

CLEANERS ON ANY PART OF THE

OVEN OR OVEN CAVITY AS IT WILL

CAUSE PERMANENT DAMAGE TO THE

CATALYTIC CONVERTORS

Oven cool down

10.1

IMPORTANT: the oven must be cooled down

before the cleaning processes are carried out.
1. In Full Serve mode, select the CLEANING symbol

from the main menu.
2. In Full or Quick Serve mode, select the blue

thermometer symbol to disable heating and start

the cooling cycle.
3. Taking all necessary precautions place a suitable

heaped container of ice, into the hot oven cavity.

Select the OK symbol to continue.
4. The cooling progress is displayed and takes

approximately 30 minutes.
5. The oven is now ready for cleaning. Select OK on

the screen after completing each stage.

COOLING THE OVEN DOWN BEFORE CLEANING

10

Preparing to clean the oven

10.2

For the oven to operate at peak efficiency, the

cavity, door, air filter and grease filter must be kept

clean.
A daily cleaning routine will ensure that you comply

with the required hygiene standards and will help to

maintain and prolong the efficiency of your oven.
Equipment required (not supplied):
Non-caustic proprietary branded oven cleaner,

heat proof gloves, protective rubber gloves, non–

abrasive nylon scrub pad, cleaning towel and cloths,

eye protection and dust mask (optional).

CAUTION: WEAR PROTECTIVE RUBBER GLOVES

WHEN CLEANING THE OVEN.

NEVER use sharp implements or harsh abrasives

on any part of the oven.

Advertising