Merrychef eikon e3 - Manual (Page 39)

Service & Parts Manual original Instructions
Part Number 32Z3812 US
Issue 1
39
SP
ARES &
REPL
A
CEMENT
6 7
8 9 10
5
3
2
4
1 PM (Personality Module) 19.3
replacement
The PM on the SRB contains the Firmware.
The PM on the BTS contains the Firmware,
Oven Serial Number, Temperature
Calibration, Cooking Programs, Application
Icons and the Recipe Images.
With a new PM fitted and casing refitted, 19.3.1
switch on the oven and tap the screen to hold and
check the BTS and SRB versions (1) are the latest
release, if not, execute a Firmware update using the
latest versions. For details see ‘Firmware Updates’
(Servicing section).
Tap the top right of the screen to bypass the 19.3.2
preheat stage (2).
Enter the service password and select OK to 19.3.3
display the Settings menu, see (3).
Select the USB symbol (4). 19.3.4
Slide the Merrychef badge upwards and insert 19.3.5
the USB Memory Stick into the slot (5).
Once the USB has stopped flashing, select the 19.3.6
required USB recipe symbol (6).
Select the Application Icons file to download 19.3.7
(7). Note; a tinted band over a file name indicates
the file is not valid for that oven.
Check the file information shown is correct 19.3.8
before selecting OK (8), if not, select ‘X’ and locate
the correct file.
When completed, select recipes to load the 19.3.9
cooking programs (9). Once the programs are
loaded the oven restarts.
Enter the Date & Time settings (10). For 19.3.10
details see under ‘Oven Control Settings’ (Product
Information section).
Turn the oven switch OFF/ON. 19.3.11
Remove the USB and keep in a safe place. 19.3.12
Reposition the USB cover.