Muxlab HDMI 4x4 Matrix Switch - Manual (Page 17)

© MuxLab Inc. HDMI 4x4 Matrix Switch Installation Guide
Page 17
3.7. Driver Setup
When interfacing a MuxLab device with Windows 2000
(or more recent) operating system, a driver setup file
will be required.
To install the MuxLab Control Center software, insert
the USB flash drive into the PC. Plug the USB cable
between the device and the PC, and power up the
device. The Found New Hardware wizard will open
(Figure 7). Select Locate and install driver software.
Figure 7: Found New Hardware Wizard