Muxlab HDMI 4x4 Matrix Switch - Manual (Page 29)

© MuxLab Inc. HDMI 4x4 Matrix Switch Installation Guide
Page 29
3.10. Cascadability
HDMI 4x4 Matrix Switches may be cascaded in order to
send an HDMI signal to more than four (4) displays. In
fact by using the local output ports of the Matrix Switch,
in theory an unlimited number of Matrix Switches may
be connected in a daisy-chain configuration. This is
possible because a clean video signal is regenerated at
each Matrix Switch.
In more practical terms, up to four (4) Matrix Switches
may be cascaded to create a 4x16 matrix. These units
would typically be connected in the following way:
When cascading multiple Matrix Switches to create a 4
x n matrix, it is recommended to name the ports on
every Matrix Switch. All the input port names of the
matrices should be the same in regards to a given
source. For example, imagine an HDMI source
designated as “Blu-Ray DVD,” and connected to Input
Port 2 of the first Matrix Switch in the chain. Input Port
2 on every other Matrix Switch in the chain should also