Muxlab HDMI 4x4 Matrix Switch - Manual (Page 27)

© MuxLab Inc. HDMI 4x4 Matrix Switch Installation Guide
Page 27
Figure 20: Setup Tab Screen
On the bottom left, the user can change passwords
(default password is nothing).
On the top right, the user can assign an IP address in
either one of two ways:
DHCP This tells the network to assign an IP address
automatically.
Static IP This allows the user to explicitly assign an IP
address. Please note that the left-most input
fields on the Gateway and IP addresses must
be between 1 and 223 inclusively.
Once an IP address has been assigned, the user can click
on Apply Changes. If DHCP was used, the dialog box
shown in Figure 21 will appear.
Figure 21: IP Address Assigned by Network