Muxlab HDMI 4x4 Matrix Switch - Manual (Page 22)

© MuxLab Inc. HDMI 4x4 Matrix Switch Installation Guide
Page 22
Automatic loading detects all devices connected to the
PC, as well as the COM port on the PC to which each
device is connected.
To load a device manually, select Devices>Add
Device… This loads devices one at a time, and does not
automatically detect the COM port on the PC to which a
device is connected. This COM port assignment must be
completed in the Configure Device tab. Until this
assignment is completed by the user, the loaded device
will appear in brackets as “offline” in the Devices tree
(Figure 14).
Figure 14: Offline Device
2. Configuring a Matrix Switch
Configuring a device consists of three operations:
(i) Assigning a PC COM port to the Matrix Switch
(if Matrix Switch was loaded manually)
(ii) Naming the Matrix Switch
(iii) Naming the four input ports and the four output
ports on the Matrix Switch