Muxlab HDMI 4x4 Matrix Switch - Manual (Page 23)

© MuxLab Inc. HDMI 4x4 Matrix Switch Installation Guide
Page 23
To configure a Matrix Switch, select the device in the
Devices tree and click the Configure Device tab (Figure
15).
Figure 15: The Configure Device Tab
If the Matrix Switch has been loaded manually, a COM
port on the PC must be selected by clicking the down
arrow next to Connect Using. The user can select a
COM port and then name (or rename) the Matrix Switch
(Device Name), its source ports (under Source Port
Names), and its display ports (under Display Port
Names).
3. Choosing a Port Selection Method
Once the Matrix Switch has been loaded and configured,
it can be controlled by the user via the Port Selection
tab. This consists of selecting which of the Matrix
Switch’s source ports will be assigned to its display
ports.