Kramer Electronics VP-790 - Manual (Page 27)

VP-790 Protocol – API Functions 23
2.12
20B
Auto Setup
2.12.1
169B
byOsdAutoConfigSet
API index: 417
Initiates auto setup of VGA signal.
Input Parameters
Name Type Range Description
None
Return Values
Name Type Range Description
Status BYTE 0x00-0xFF 0 if successful, error code otherwise
2.13
21B
AutoZoom
2.13.1
170B
byOsdMultipleUnitAutozoomSet
API index: 3169
Enable/Disables AutoZoom
Input Parameters
Name Type Range Description
Value UWORD32 0: Off
1: On
Enable/disable the automatic zoom.
Return Values
Name Type Range Description
Status BYTE 0x00-0xFF 0 if successful, error code otherwise
2.13.2
171B
byOsdMultipleUnitAutozoomGet
API index: 3170
Retrieves status if AutoZoom is enabled or disabled.
Input Parameters
Name Type Range Description
Option BYTE 0: From cache
1: From SPD
Retrieval method
Return Values
Name Type Range Description
Status BYTE 0x00-0xFF 0 if successful, error code otherwise
Value UWORD32 0: Off
1: On
Announce Message System activated
or deactivated.