RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 110)

24.8.2. Setting tare in the filling/dosing mode
In <P7.4.2 TARRING> you can enable/disable tarring after every
ingredient.
Procedure:
• Enter
<P7 WORK MODE> and then:
NONE - Masses of subsequent ingredients
are totalized on the main display
MANUAL - ingredients tarred manually
AUTOMAT. - automatic tarring after every ingredient
Return to weighing:
See 11.3.
24.8.3. Manual confirmation of every ingredient
In <P7.4.3 INGRED. CONF.> you can if ingredients should be confirmed
manualny or not and set the parameter to YES if you want the manual
confirmation or to NO for automatic pass to the next ingredient).
- 110 -