Databases, Logging in, Data ases – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 62: Ogging in
Advertising
18. DATABASES
18.1. Logging in
In case of activating of logging procedure (submenu <P6.1 LOG IN>),
an operator after switching on has to perform a jogging procedure which
consists in inscribing a password.
Operators can also use a transponder cards for this procedure provided
the terminal is equipped in a transponder card reader.
(see 15.4).
Procedure:
• Enter
<P6 DATABASES> according to 11.2. and then:
Return to weighing:
See 11.3.
Users can log in even if this procedure is disabled at the start:
• Turn on the device
,
• Press during a display test,
• Program will show the following window:
- 62 -
Advertising
This manual is related to the following products: