RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 162)

- 162 -
5. A special protocol is required in order the code be received by
RADWAG equipment. It is required to program an appropriate
prefix and suffix. Prefix – one byte 01 hexadecimally, suffix one
byte 0D hexadecimally.
6. Most barcode scanners allow to enable/disable different
symbologies (barcode types).
7. Programming of scanners is usually performed by reading special
barcodes or by using an external software tool.
8. Scanners marketed together with RADWAG systems are always
configured according to the rules above.
Barcode with required prefix and
suffix in hexadecimal format
Barcode without
required –fixes in
ASCII format
Code type
01 30 30 32 31 30 31 32 36 0D 00210126 EAN-8
01 30 31 32 33 34 35 36 37 38 39 0D 0123456789 2 of 5
01 43 4F 44 45 20 33 39 20 54 45 53 54 0D CODE 39 TEST CODE 39
01 31 31 30 31 32 33 34 35 36 37 38 39 31 0D 1101234567891 EAN-13
01 43 6F 64 65 20 31 32 38 20 54 65 73 74 0D CODE 128 Test CODE 128
32.2. Cooperation with „EDYTOR WPW” – PC software tool
Standard WPW scales can be supervised by the accompanied
program EDYTOR WPW, that can work as an additional display
on the monitor and:,
• Edit and change user parameters (filters, date/time, backlight,
configuring I/O, port parameters etc.),
• Create, upload, edit, download databases,
• Receive and save printouts in text files,
• Define the bottom line,
• Define non-standard printouts.