Number of cycles declaration, Umber of cycles declaration – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 111
Advertising
Procedure:
• Enter
<P7 WORK MODE> and then:
Return to weighing:
See 11.3.
24.8.4. Number of cycles declaration
In case of setting <P7.4.4 ASK REPT. NO> to YES, sers can declare
at the start of dosing / filling process (see ch.25.6.2) can declare
the number of cycles (automatic repetitions of dosing/filling of
the selected recipe).
Procedure:
• Enter
<P7 WORK MODE> and then:
- 111 -
Advertising
This manual is related to the following products: