RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 117)

24.8.11. Process of dosing / filling
1. Press to select a required recipe and confirm it with .
In the bottom line you will see the name of the selected recipe,
2. Start process by pressing ,
3. If <P7.4.7 MINUS DOSING> is enabled the dosing process is
performed with the „-” sign. Weighings registered in the database
are of positive value „+”,
4. If <P7.4.8 CHECK BATCH NUMBER> is set to ALFA or NUM, there
is a number of product series prompted before every weighing,
5. If in the recipe an additional product is defined then its weight
or multiplier is set when it appears on the screen.
At the moment you start the process:
• the
pictogram starts blinking,
• the keyboard is blocked until the process is completed,
• in the bottom line the first ingredient is displayed for about
1s and then you will see:
6. After weighing the first ingredient you will see the name of the next
ingredient in the bottom line and then it will the process of weighing
it.
- 117 -