Address setting, Order operating of communication protocol, Ddress setting – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 40: Rder operating of communication protocol
Advertising
Caution:
The procedure of designing non-standard printouts is described
in chapter 17.6 of this manual.
Return to weighing:
See 11.3.
15.1.3. Address setting
Procedure:
• Enter
< P3.1 COMPUTER > according to 11.2. and then:
• Inscribe a value (0 to 254) and press
.
Return to weighing:
See 11.3.
15.1.4. Order operating of communication protocol
User in parameter <P3.1.4 BASIC TRS.> has possibility to set
communication protocol designed to communicate between
RADWAG scale and external device.
- 40 -
Advertising
This manual is related to the following products: