RADWAG WPW 60/H5/K Multifunctional Scales - Manual (Page 60)

Caution:
1. Remember that the name of a new printout design should have the
following pattern: RPXX , where: XX – subsequent number of
printout.
2. FORMULATION software do not include a database of contractors.
That is why the printout RP03 substitutes „Contractor code” with
dashes < - - - - >.
17.6.5. Variables for printouts of reports from recipes
%108 Report date
%109 Report time
%110 Operator code
%111 Operator name
%112 Recipe code
%113 Recipe name
%114 Number of ingredients in the recipe
%115 Status of the recipe
%116 Total mass of recipe
%117 Calibration unit of platform 1
%118 Ingredient mass
%119 Ingredient nominal mass
%120 Deviation of ingredient mass (nominal – real mass)
%121 Ingredient unit
%122 Ingredient code (from the assortment database)
%123 Ingredient name (from the assortment database)
%124 Number of weighing platform
%125
Setting present ingredient for the report (variables concerning
ingredients will print an adequate data)
%133 Number of series for the ingredient
This program includes a default report pattern (name: RCP1 ),
that includes:
- Date and time of report,
- Operator name,
- Recipe name,
- Recipe code,
- 60 -