Configuration of outputs – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 83
• Press
, you will see <P8.1.1 TARE B.>,
• Press
:
• Confirm your selection with
,
• Using go to the next parameter.
Caution:
You can ascribe all your buttons accordingly. Remember that the
standard solution has only 3 inputs.
Return to weighing:
See 11.3.
20.2. Configuration of outputs
Users can configure outputs according to their needs.
You can declare outputs:
MIN
Mass below the Min threshold
OK
Mass between Min and Max threshold
MAX
Mass over the Max threshold
STABLE
Stable result over the LO threshold
P1 CHUTE
Chute of platform 1
P2 CHUTE
Chute of platform 2
DOSE. SIGNAL.
Signalling of dosing process
Procedure:
• To declare an output number connected with the function,
enter <P8.2 OUTPUT CONF.> and then:
• Press
, you will see <P8.2.1 MIN>,
- 83 -