Configuration of external inputs / outputs, Configuration of external buttons, Conf guration of external inputs / outputs – RADWAG WPW 60/H5/K Multifunctional Scales User Manual
Page 82: Onfiguration of external buttons
• Using
select a report (report description in ch. 17.6.4
of this manual),
• For viewing data press
(report description in ch. 17.6.4
of this manual),
• Press
you will see a printout on the connected printer.
Return to weighing:
See 11.3.
20. CONFIGURATION OF EXTERNAL INPUTS / OUTPUTS
20.1. Configuration of external buttons
Following external buttons can be connected:
TARE BUTT
Tare button
PRINT BUTT
Print button
ZERO BUTT
Zero button
START BUTT
Start button,
Start weighing animals button
STOP BUTT
Button for breaking dosing process,
Button for breaking weighing animals
EXT. START
Input signal allowing to START dosing
TERM. BUTT.
Terminating of dosing process
CHUTE PERM.
Perdition input signal for chute
DOSE PERM.
Perdition input signal for ingredients
Procedure:
• To declare a number of input ascribed to the button enter
<P8.1 EXTERNAL BUTTONS> and then,
- 82 -