Using the apple printer utility for windows – Apple Color LaserWriter 12/600 PS User Manual
Page 135
DOS notes
If you are using DOS programs, refer to the manual that came with your
program and follow the instructions for using a PostScript printer. Most DOS
programs are PostScript compatible.
Capturing a print queue for DOS printing
From DOS, you can use the NetWare
CAPTURE
command to map the
parallel port to a print queue.
m
Log in to the NetWare network and enter the
CAPTURE
command, using the
following syntax:
CAPTURE /q=
queue_name
local=
lptnumber
server=
server_name
job=
new
Unless you specify otherwise, the command assumes that you are mapping
the LPT1 port to a queue.
Using the Apple Printer Utility for Windows
The Apple Printer Utility for Windows program supplied with the printer
software lets the printer administrator control various aspects of how the
printer works. For information about using the Apple Printer Utility for
Windows, see Chapter 3 of the Color LaserWriter 12/600 PS User’s Manual.
121
Windows 3.1 and DOS Users