Apple Color LaserWriter 12/600 PS - Manual (Page 37)

This chapter describes how to set up the printer for use with IBM PC or
compatible computers running Windows 3.1, Windows 95, Windows NT, or
DOS. It provides detailed procedures for setting up the printer for use on a
Novell NetWare network and instructions for installing the Apple Printer
Utility for Windows. Read this chapter first, then read Chapter 3 of the Color
LaserWriter 12/600 PS User’s Manual for instructions on configuring the
printer with the Apple Printer Utility.
System requirements for Windows 95
To use the printer, your computer system must meet these requirements:
m IBM PC or compatible, with an 80486 or higher CPU
m hard disk drive
m at least 8 MB of RAM
m Microsoft Windows 95
m CD-ROM drive or 3.5-inch floppy disk drive that reads 1.44 MB disks
m If you’re using the printer on a network, you must set up your network
client software. You may use Client Software for NetWare Network from
Microsoft as your network client software.
Installing all the printer software requires approximately 3.5 MB of free space
on your hard disk.
23
3 Setting Up the Printer for Windows,
DOS, and NetWare Users