Apple Color LaserWriter 12/600 PS - Manual (Page 51)

17 Click OK to dismiss the message.
Installation is complete.
18 Choose how to proceed:
For users connected via the parallel cable, the default printer driver settings
should suffice.
You can monitor your printer software with the Apple Print Monitor for
Windows; see “Initial Apple Print Monitor for Windows Setup” in Chapter 3
of the Color LaserWriter 12/600 PS User’s Manual.
For instructions on using the Apple Printer Utility for Windows, see “Setting
Additional Parameters With the Apple Printer Utility for Windows” in
Chapter 3 of the Color LaserWriter 12/600 PS User’s Manual.
To configure your printer software with NetWare, see “Initial Novell NetWare
Setup,” later in this chapter.
Installing the printer software for Windows NT
These instructions install the printer on an Intel architecture Windows NT
3.5x Workstation. If you have a Windows NT 3.5x Server or other computer
architecture, see the next section.
Follow the steps below to install the PostScript Printer Description file for
these Apple printers:
m Apple Color LaserWriter 12/660 PS
m Apple Color LaserWriter 12/600 PS
m Apple LaserWriter 12/640 PS
m Apple LaserWriter 16/600 PS
m Apple LaserWriter Select 360
m Apple LaserWriter Pro 600
m Apple LaserWriter Pro 630
1 Start Windows NT 3.5.
2 Insert the CD-ROM disc into the CD-ROM drive.
37 Setting Up the Printer for Windows, DOS, and NetWare Users