Apple Color LaserWriter 12/600 PS - Manual (Page 81)

Configuring IBM AIX version 3.x
1 Log in as root .
2 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an
IP Address to the Printer,” earlier in this chapter.
3 Make sure the printer’s IP name and address are entered in the /etc/hosts file.
4 At the UNIX prompt, type the following to run the SMIT utility:
smit
5 To add a remote queue, choose the following items from the SMIT menu:
Print System Management
Add a Print Queue
Remote
Standard Processing
A form appears for you to define a remote printer.
6 Enter information into the remote printer form, as follows:
m
Name of queue to add Type the local queue name users will use as the name
for the printer.
m
Host name of remote server Type the printer IP name assigned to the printer
as described in “Step 3: Assigning an IP Address to the Printer,” earlier in
this chapter.
m
Name of queue on remote printer Type raw
m
Type of print spooler or remote server Select BSD.
7 Click Do.
8 Click Done.
9 Choose Exit from the Exit menu.
67 Setting Up the Printer for UNIX Users