Apple Color LaserWriter 12/600 PS - Manual (Page 49)

Installing on a Windows 3.1 computer
1 Find the Windows disks containing the printer software and make sure they’re
write-protected.
Slide up the write-protection tab in one corner of the floppy disk so that you
can see through the hole.
2 Start Windows.
Before installing the software, make sure the Windows Control Panel and
Printers control panel are closed.
3 Insert LaserWriter Disk 1 for Windows 3.1 into a floppy disk drive.
4 From the Windows Program Manager, choose Run from the File menu.
5 Type a:\setup or b:\setup (depending on which drive holds your installation
disk) in the command line field and click OK.
After a few moments, a message appears telling you to close all other
applications before continuing with this installation.
6 Click Continue if you have no other open applications.
If you have open applications, click Exit to stop this installation. Close all
other applications and start the installation process again.
A message appears that lets you view the ReadMe file for late-breaking news.
7 Click Yes to view the ReadMe file.
8 When you have finished reading the ReadMe file, choose Exit from the File menu in the
Microsoft Write application.
A dialog box appears that allows you to select Express Installation, Custom
Installation, Printer Driver Only, or De-Install.
Express Installation installs all the software you need. It creates the Apple
LaserWriter Software program group and installs within it the ReadMe file,
the Apple Print Monitor for Windows, the Apple Printer Utility for Windows
and the Apple LaserWriter Utility for Windows which you use to name the
printer and perform various printer administrative functions.
35 Setting Up the Printer for Windows, DOS, and NetWare Users