Apple Color LaserWriter 12/600 PS User Manual
Page 161
A light film of fuser oil appears on the exterior of the printer near the multipurpose tray.
Oil can spill out of the fuser assembly and appear on the exterior of the
printer if the printer is not level. You can remove the oil from the printer’s
exterior with paper towels and a window cleaner. Do not use paper towels and
window cleaner on the interior of the printer. See Chapter 1 of this update for
information on leveling the printer.
The Paper Jam and Paper Out lights are flashing, and the yellow toner cartridge and the
photoconductor indicator lights are on.
This symptom indicates either a fuser pump has failed or that oil in the fuser
assembly has spilled or overflowed. Try the following steps:
1
Verify that the printer is level.
See Chapter 1 of this update for the procedure for leveling the printer.
2
Turn the printer off.
3
Open the access door and remove the fuser oil bottle.
4
Open the fuser access door and pump the fuser lever a minimum of 50 times.
If the above steps do not fix the problem, contact an Apple-authorized service
provider, or in the U.S., call 1-800-SOS-APPL.
A spot or line appears on every printed page.
If the spot appears approximately every 5 1/2 inches, the photoconductor
cartridge is probably damaged. Try replacing the photoconductor cartridge.
147
Troubleshooting