Apple Color LaserWriter 12/600 PS - Manual (Page 75)

8 To enable the print queue you just created, choose the following items from the SAM
menu, in order:
Peripheral Devices
Printers and Plotters
Enable a Printer
9 When SAM asks for the printer name, type the IP name assigned to the printer as
described in “Step 3: Assigning an IP Address to the Printer,” earlier in this chapter.
10 Leave SAM.
11 Start the LP request scheduler by typing
/usr/lib/lpsched
12 To test the connection, once again type the ping command from a workstation on the
same subnet as the printer:
ping printer_IP_name
If the ping command responds by telling you that the printer is alive on the
network, the address assignment was successful.
If the ping command does not respond, or tells you the printer was not
found, then the address assignment failed. Try the steps in this procedure
again, making sure you type the printer’s Ethernet address exactly as it
appears on the startup page. If it still doesn’t work, see the troubleshooting
suggestions in Chapter 13 of the Color LaserWriter 12/600 PS User’s Manual.
13 Test printing with the following command:
lp -d queue_name filename
If the test print doesn’t work
If the test document doesn’t print, follow these steps:
1 Check whether the rlp daemon is running. At the UNIX prompt, type
ps -e | grep rlp
If the process is running, you will see one or more lines of text; if it is not
running, you will see no response.
61 Setting Up the Printer for UNIX Users